Maintaining a property is integral to a successful upkeep of that property’s function. An office building will need to be maintained so that business can be carried out inside. A home needs to be maintained so the residents can live their day-to day lives without major problems.

In order to maintain this functionality there are loads of different property maintenance services available. Services range from the following: Painting and decorating, waste clearance, property maintenance, garden maintenance, brick paving, ground works, roof repair, grass cutting and civil engineering.

All of the above are important. Ideally all of the bases would be covered in a perfectly maintained property, but that can sometimes be unrealistic when considering the value of the property and the available local services actually offered.

Smoke vents are openings installed in the roof to provide an escape route for heat and smoke produced by the fire inside a building. The vents operate through buoyancy action and are hence referred to as gravity vents. If you are looking for the best way to prevent damages to your property when a fire outbreak occurs, these vents could be your number one solution.

Below are the TOP benefits you will be able to enjoy if you install the vents in your roof:

Reduced amount of damages

One of the top benefits of installing the vents on your property is that they go a long way in minimizing the amount of damages caused by the fire. When a building catches fire, all the things inside will be reduced to ashes. In addition to this, the fire will also raise the interior temperatures to such a point that the building’s structure will be altered. A building with an altered structure is likely to crumble at any time, making it risky for you if you decide to occupy the house again after the disaster.
Read more

When it comes to roof surveying, rainfall simulation is one of the most common types of tests. This is basically because it is reasonably effective in detecting issue with the roof’s structure, while also being pretty cheap too, at least in comparison to some other building survey jobs.

The pricing of rainfall simulation can cost anywhere from £1000 to £4000 depending upon the size of the roof and the number of leaks you’ve got. In comparison to other roofing survey techniques, such as infrared imaging surveys, this is about a third the cost.

The way rainfall simulation tests work is pretty straight forward, requiring only basic technology. All it is is basically a hose (yes, a lot like a garden hose) which will pump water onto the top of a roof to simulate rainfall. This water should then make its way through the leaks in the roof, revealing their exact location. But of course, normal water wouldn’t be able to give specific locations, so a colour dye is added to it so that its location can be seen more easily.

The roof is a vital part of any building whether residential or commercial. It is, therefore, important to make sure a proper roof survey is conducted before moving into any building. If you are already in the building, it helps to conduct the survey once in a while to ascertain that it is in proper condition, and it will serve you for a long time without any complications. To get accurate results, it is best to look for a reputable and trustworthy roofer who will get the job done right the very first time. There are a number of things you can expect from this survey and some of them include:

Written and verbal report on the condition of the roof
There are multiple things that are covered under this such as:
• Roof covering basics including age, how long it is expected to last, suspected leaks and any conditions that can be compared to similar properties.
• Rainwater and gutter systems- type, blockages/blocking, cracks/damage, leaking.
• Ridge tiles- the condition of tiles & mortar as well as an iron check.
• Chimney stacks- the condition of mortar and brickwork, worn flaunching, lose chimney pots, and flashing kinds.
• Gulley’s and valleys- fatigue splits and any repairs required.
• Skylights and roof window- flashing check, as well as inspection of fogging units or cracked glass.
• Flat roofs-condition of the flat roof, inspection for soft spots and roof covering.
• The structure of the roof- this includes a thorough internal and external check for roof spread, roof sag, Purlin condition & support, ventilation, condensation issues, tie bars, and wall plates.
• Dormer roofs- covering and durability. Read more

As with all types of loft insulation, there are different ways to install each.  Below are a few things you should do before installing loft insulation.

• Clear your loft – May seem like an obvious tip, but many attempt the lazy way of placing insulation (around items).
• Wiring – When installing insulation, make sure to keep wires above. If you feel like you are on the verge of stretching the wiring, then contact an electrician who can re-route the wiring.
• Follow instructions – That means following this one too! Make sure to read the manufacturer’s instructions. The product was made to be installed a certain way and these instructions will tell you the best way to get results.